NETGEAR WND930-10000S

WND930 Outdoor Dual Band Wireless-N

High Power Dual Band Concurrent Access Point
Maximizes wireless coverage with superior outdoor access

Extends wireless coverage to outdoor with the high power WND930 Access Point. The WND930 Access Point combines industrial and robust design with flexible antenna options, and dual band (2.4 and 5 GHz) concurrent operation for optimal outdoor deployment. The WND930 Outdoor Access Point is powered by redundant dual Power over Ethernet (PoE) gigabit ports as well as the capability to power other PoE devices. The WND930 Outdoor Access Point operates under harsh environment with its industrial grade IP67 enclosure and an embedded heater to allow the Access Point to operate in below freezing point temperature. Through its user friendly interface and mounting accessory kits, the WND930 Access Point can be configured and installed easily in less than 10 minutes.

Physical Characteristics

Power
Power over Ethernet (802.3af or 802.3at)
2 ports 802.3af or 1 port of 802.3at for AP operation
2 ports of 802.3at for concurrent AP and PoE PSE operations

Physical Dimensions
Dimensions (LxWxH) 255x225x78 mm 10x10x3 in

Weight
1894 g (67 oz)

Mounting
Wall mount/pole mount kit included

Physical Interfaces

Two (10/100/1000Base-T Ethernet (RJ-45) port with Auto UplinkTM (Auto MDI-X) with PoE PD (Power over Ethernet In)
One (10/100/1000Base-T Ethernet (RJ-45) port with Auto UplinkTM (Auto MDI-X) with PoE PSE (Power over Ethernet Out)

External Antenna Connectors

Two connectors for 2.4GHz antennas Type N connector (female)
Two connectors for 5 GHz antennas Type N connector (female)

LEDs

Power, Activity, 2.4GHz, 5 GHz, Heater

Operating Temperature

-4° to 140° F (-20° to 60°C)

Storage Temperature

-40° to 176° F (-40° to 80° C)

Operating Relative Humidity

Minimum 10%
Maximum 90%

Storage Humidity

Minimum 5%
Maximum 95%

MTBF

@ 25°C > 10,45K hours
@ 60°C > 290,000 hours

Ingress Protection Marking

IP67 rated

Power Consumption

15.2 W max (heater off, no PoE out)
25.1 W max (heater on, no PoE out)
33.9 W max (heater off, PoE out)
43.8 W max (heater on, PoE out)

RF Characteristics
Standards

IEEE 802.11n 2.0 specification
IEEE 802.11g
IEEE 802.11b
IEEE 802.11a

Frequency Band

2.4GHz and 5 GHz dual band concurrent operation

Maximum RF Power Output (country dependent)

27 dBm (500 mW) 2.4GHz
26 dBm (400 mW) 5 GHz

Maximum Theoretical Throughput

300 Mbps (2.4GHz)
300 Mbps (5 GHz)

Antenna Gain

8 dBi (2.4GHz)
8 dBi (5 GHz)

Network Management

Standalone
Centralized management (future)

Advanced Wireless Modes

WDS Point-to-point wireless bridge mode
Wireless Access point mode

Security

Wired Equivalent Privacy (WEP) Encryption
WiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK)
MAC address filtering
1 BSSID

802.11e WMM

Wireless multimedia mode for QoS

Safety Certification
ITU-T K. 21